When it comes to diamonds, there are numerous scams to avoid. Most scams are minor, but there are some major ones that come up from time to time concerning the buying and selling of diamonds. Scams occur simply because most people who buy diamonds “for whatever reasons” don’t know that much about diamonds. Therefore, they are easily fooled.

A common scam that most jewelry stores participate in is the Carat Total Weight scam. The tag on the piece of jewelry, usually a ring, only states the total carat weight of all diamonds in the piece, instead of listing the total weights separately for each diamond. This leads consumers to believe that the main diamond in the piece is actually bigger than it is. Ask what the total carat weight of the center stone is. Also beware of fractions. Jewelry stores are allowed to round off diamond weights. This means that if the jeweler tells you that it is a 1 carat diamond, it is probably between 3/4 and 1 carat – but
closer to3/4!

Jewelry stores often run “fluorescence” scams to varying degrees. Referring to a diamond as a blue-white diamond is such a scam. A blue-white diamond sounds very unique and special, but in fact, this type of diamond is of lesser quality – even though the jeweler will try to make you think you are getting something special. Jewelry stores also like to show their diamonds in bright lights. Lights make diamonds shine. Ask to see the diamond in a different, darker type of lighting as well.

Some truly unscrupulous jewelers target those who want appraisals on diamonds that were given to them as gifts or that were purchased elsewhere. They will try to tell you that the diamond is worthless, or worth less than it actually is worth and offer to take it off your hands or trade it for a much better diamond, along with the cash to make up the difference. This is called low balling. Get a second, third, and even a forth opinion before taking any action.

Another common dirty trick is to switch the diamond you have chosen and paid for with one of lesser quality and value when you leave it to be set in a piece of jewelry, or leave a diamond ring to be sized. The only way to avoid this is to do business with one trustworthy jeweler. Avoid jewelers that you have not done business with in the past.

There are many more scams that jewelry stores commonly pull on unsuspecting consumers. Just use your best judgment,
and purchase your diamonds with the utmost care and consideration.

Caring for a diamond takes more than occasional cleanings. Diamonds are forever, but they can be damaged if you are not careful. By learning how to properly care for your diamond, you will ensure that your diamond is indeed forever.

First, you should take your diamond jewelry to a jeweler once a year. Have him check the mountings and prongs that hold your diamond in place. Have him make any needed repairs. This will prevent your diamond from falling out of its setting and becoming lost.

Diamond jewelry that is not being worn, or diamonds that are loose should be stored in a fabric lined jewel case, or in a jewelry box where it can be kept separate from other jewelry. Each piece should have its own compartment. This will keep diamonds from becoming scratched, and it will also keep your diamond from scratching other jewelry as well.

Remove your diamond jewelry when doing physical work. Diamonds can be chipped and scratched easily. Also avoid allowing your diamond to come into contact with bleach or other household cleansers – this can damage or change the color of the settings and mountings, and it may even irreversibly change the color of the diamond!

You’ve been told that having a certificate or a diamond grading report is important, and as a responsible consumer, you get one – unfortunately, you probably won’t understand a word of what is on that diamond grading report, unless you are a jeweler.

On the color grading scale, D, E, and F mean that the diamond has no color. G, H, and I means that it has very little color. J, K, and L means that the diamond has a slight yellow color. P, Q, R, S, T, U, V, W, and X means that the diamond is a darker shade of yellow. Z means that the diamond has a fancy color – other than white or yellow. On the color grading scale, D is the most valuable, and X is the least valuable – however diamonds that get a Z rating are the rarest and most expensive diamonds in the world.

There are many aspects to a grading report. Figuring it all out can be very confusing. You should talk to a jeweler you trust, and have them explain everything on the diamond grading report to you.

Diavik is also owned by Rio Tinto, located in Canada it is a very large mine. It is located north of Yellowknife and south of the Artic Circle on an island. The island is connected by an ice road. It is also an important part of the regions economy employing more than 700 people and producing more than 8 million carats annually.

Ekati diamond mine is owned by BHP Billiton and located south of the artic circle in the Northwest Territories of Canada.
The Ekati is Canada’s first operational diamond mine. Diamonds mined here are sold under the Aurias trade name. Authenticity is verified through Canada Mark service. CanadaMark service is also owned by BHP Billiton Diamonds, Inc.

Baken diamond mine is located along the lower Orange River in South Africa. It is owned and operated by Trans Hex. The
average size stone for 2004 was 1.29 carats. In 2004, this mine produced a 78.9 carat D color flawless diamond that sold for more than 1.8 million dollars (US), as well as a 27.67 pink diamond that was sold for over 1 million US dollars.

Merlin is the second of only two diamond mines in Australia. No longer operating, it was owned by Rio Tinto and sold to Striker Resources, who has explored the possibilities of reopening the mine.

Orapa is the world’s largest diamond mine. It us located 240 Km west of Francistown. The mine is owned by “Debswana” which is a partnership between DeBeers and the government of Botswana. This mine operates 7 days a week. It maintains pre primary and primary schools for its employees’ children. There is also a 100 bed hospital and game park. This mine began production in 1971 and is the oldest mine owned by the Debswana Company.

The Premier mine located in Cullinan, South Africa produced the largest gem diamond ever in 1905. The Cullinan Diamond
weighed 3,106.75 carats. This mine also produced the Golden Jubilee diamond which weighed 545.67 carats. This mine is
owned by the De Beers Company and was renamed The Cullinan Diamond Mine in 2003 in celebration of its centennial.

Color is the result of the composition of a diamond and it does not change. When a jeweler is describing the color of a diamond they are referring to the presence or absence of color in white diamonds. Because a diamond with no color allows maximum light to pass through, colorless diamonds are preferred for their sparkle.

Cut refers to a diamonds reflective quality. Most diamonds are cut with 58 facets. The brilliance of diamonds is heavily dependent on the cut. The different angles and the finish of a diamond determine its ability to reflect light and cause its brilliance and fire. Remember that the cut of a diamond can have an impact on its durability as well as its beauty. Some cutting faults can make a diamond prone to breakage. A diamond that is cut too thin can also cause light to leak out of the back and the diamond will lose some of the sparkle and appear not to shine. So, as you can see the Cut is probably the most important of the Four C’s.

During the formation process, inner flaws, or inclusions occur in most diamonds. The number and size of these inclusions
determine what is referred to as the clarity of a diamond. Diamonds that are clear create more brilliance and therefore are rarer and highly priced. To be considered “flawless” a diamond must have no surface or internal imperfections visible upon being viewed by a skilled diamond grader using 10 power magnifications.

Carat is the unit of weight by which diamonds are measured. One carat is equal to 200 milligrams. A carat is divided into 100 segments called points. 150 points would equal one and a half carats.

When you go to the store to make that all important diamond purchase, do not be shy! Ask questions, get the answers needed to make an informed purchase. Shopping for certified diamonds enables you to make an informed selection. Knowing the “four C’s” allows you to comparison shop and purchase the best diamond at a fair price. But, before making a purchase, shop around and decide what shapes and styles really appeal to you.

Enjoy your diamond for years to come!